Owners Manual

Figure 72. Installing the custom GPU I/O brackets and the support brackets
1. Torx screw (2) 2. support bracket
3. GPU 4. I/O bracket
5. screw (5)
Next steps
Follow the procedure listed in After working inside your system on page 24.
Installing the GPU brackets on the GPUs removed from your
system
Prerequisites
1. Follow the safety guidelines listed in Safety instructions on page 23.
2. Keep the Phillips #1, #2, and the Torx T6 screwdrivers ready.
3. Remove the GPU brackets.
Steps
1. Align the screw holes on the front I/O bracket with the screw holes on the GPU.
2. Secure the I/O bracket to the GPU by using the screws.
3. Align the screw holes on the support bracket with the screw holes on the GPU.
4. Secure the support bracket to the GPU by using the screws.
72
PowerEdge C4140 installing and removing system components