Hardware Owner's Manual

Using the System Setup Program 23

SATA Port0-3: [Not Detected][Hard Disk][ATAPI CDROM] While entering

setup, BIOS auto detects the presence of SATA devices. This displays the

status of auto detection of SATA devices. This item displays information only

and is unavailable when AHCI Mode is enabled.

Power Saving Features: Disable/Enable power saving features in the server

board.

PCI Configuration

Scroll to this item and press <Enter> to view the following screen. The PCI

Screen provides fields to configure the onboard NIC controllers.

*1: [Disabled] [Enabled]

Control Group User Access Level

OnChip SATA Type Access Level 1

Power Saving Features Access Level 1

BIOS SETUP UTILITY

Advanced

PCI Configuration iSCSI Remove Boot if enable

iSCSI boot, must disable PXE boot

iSCSI Remote Boot

NIC1 - 82576EB

NIC2 - 82576EB

IOMMU

•Active State Power

Management

Configuration

[DISABLED]*1

[Enabled with PXE]*2

[DISABLED]*1



 , 

+,

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit

Exit