Hardware Owner's Manual

26 Using the System Setup Program
USB Configuration
Scroll to this item and press <Enter> to view the following screen:
*1: [Disabled] [Enabled] [Auto]
*2: Internal USB connector.
This menu enables you to configure USB devices.
USB Devices Enabled: displays USB devices currently detected.
USB PORT 2 (BMC): internal port.
BIOS SETUP UTILITY
Advanced
USB Configuration Enables support for legacy
USB. AUTO option disables
legacy support if no USB
devices are connected.
Module Version - 2.24.5-13.4
USB Devices Enabled:
1 Keyboard, 1 Mouse, 1 Hub, 1 Drive
Legacy USB Support [Enabled] *1
• USB Mass Storage Device Configuration
USB PORT 0 (Front 0) [Enabled]
USB PORT 1 (Front 1) [Enabled]
USB PORT 2 (BMC) [Enabled] *2
USB PORT 3 (SSD) [Enabled]

 , 
+,
F1
F10
ESC
Select Screen
Select Item
Change Options
General Help
Save and Exit
Exit