Hardware Owner's Manual

Using the System Setup Program 29

Boot Settings Configuration

Select this item and press Enter to view the following submenu items:

*1: [Disabled] [Enabled] (If you enable PXE first, the 1

boot device will set

to PXE. Disable PXE first, the device priority will not change).

Quick Boot: enable this item to allow BIOS to skip certain tests during the

POST, which will decrease boot up time.

Quiet Boot: enable this item to display the OEM logo instead of POST

messages. When disabled, normal POST messages appear.

Wait For 'F1' If Error: enable this item to have the system prompt you to

press F1 if an error occurs. This enables you to view the error.

Force PXE First: Enable and disable this item to force a network boot (PXE).

Force PXE Boot Only: Enable/Disable PXE to be the Only boot device.

BIOS SETUP UTILITY

Boot

Boot Settings ConfigurationAllows BIOS to skip

certain tests while

booting. This will decrease

the time needed to boot

the system.

Quick Boot

Quiet Boot

Wait For ’F1’ If Error

Force PXE First

Force PXE First Boot Only

Force USB First

[Enabled]

[Disabled]

[Enabled] *1

[Disabled]



 , 

+,

F10

ESC

Select Screen

Select Item

Change Option

General Help

Save and Exit

Exit