Hardware Owner's Manual

44 Using the System Setup Program
0082 Secondary Master Drive – ATAPI Incompatible Pause
0083 Secondary Slave Drive – ATAPI Incompatible Pause
0160 The processors installed in your system are not able to
match their frequencies.
Pause
0162 The processors installed in your system do not have the
same cache size.
Halt
0163 The processor(s) installed in your system are not known by
the BIOS. Please contact your BIOS vendor for appropriate
updates.
Pause
0164 Multiple core processors cannot be installed with single
core processors.
Halt
0165 The processor(s) installed in your system are of an
unknown revision. Please contact your BIOS vendor for
appropriate updates.
Pause
4100 Node(s) - no valid DIMM configuration detected Pause
4101 DIMM(s) checksum error detected Pause
4102 DIMM module type(buffer) mismatch Pause
4103 DIMM CL/T mismatch Pause
4104 DIMM organization mismatch (128-bit) Pause
4105 SP D m iss ing Trc or Trfc in fo Paus e
4106 SPD missing byte 23 or 25 Pause
4107 Bank interleave requested but not enabled WARNING
4108 Dram ECC requested but not enabled Pause
4109 Online spare requested but not enabled Pause
410A DIMM(s) Running in Minimum Mode Pause
410B No DQS Receiver Enable pass window found Pause
410C DQS Rcvr En pass window CHA to CH B too large Pause
410D DQS Rcvr En pass window too small (far right of dynamic
range)
Pause
4160 The processor(s) installed in your system are not
multiprocessing capable.
Halt
5120 Cmos cleared by jumper Pause
5121 Password cleared by jumper Pause