Hardware Owner's Manual

62 Installing System Components
Removing a Processor
1
Remove the heat sink. See "Removing a Heat Sink" on page 60.
2
Release the locking lever. See Figure 3-13.
3
Remove the processor.
Figure 3-13. Removing and Installing a Processor
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
CAUTION: The processor is held in its socket under strong pressure. Be aware
that the release lever can spring up suddenly if not firmly grasped.
1 processor 2 processor alignment notch
3 locking lever 4 processor socket
1
2
3
4