Hardware Owner's Manual

Installing System Components 67
Removing the System Board
1 Remove the hard-drive board. See "Removing the 2.5" Hard-Drive Board"
on page 63 or "Removing the 3.5" Hard-Drive Board" on page 65.
2 Remove the four screws from the system board. See Figure 3-17.
3 Remove the system board from the sled.
Figure 3-17. Removing and Installing the System Board
Installing the System Board
1 Place the new system board into the sled.
2 Replace the four screws securing the system board. See Figure 3-17.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.