Hardware Owner's Manual

Troubleshooting 83
4
Troubleshooting
Troubleshooting Sequence
Server Boot Issues
System Does Not Boot After Initial Installation
Power Connector Not Plugged In
Monitor Issues
Power Supply and Chassis Issues
Cable Issues
Electrical Short or Overload
Defective Components
System Does Not Boot After Configuration Changes
Hardware Changes
Software Changes
BIOS Changes
Viewing System Event Logs For Investigation
Installation Problems
Troubleshooting External Connections
System Does Not Boot After Initial Installation
Power Connector Not Plugged In
If the power supply cable is not plugged into the system board CPU power
connector, the system cannot boot up, even though chassis front panel LEDs
and the fan may be operational. Verify that the power connections are good.