Reference Guide

Figure 1. Installing the Rubber Jumper
5 Install the LSI 9285 PCIe card.
NOTE: For more information on installing a PCIe card, see the Hardware Owner’s
Manual at dell.com/cloudedgemanuals.
6 Close the system.
7 Reconnect the system to its electrical outlet and turn the system on, including
any attached peripherals.
____________________
© 2013 Dell Inc. Printed in the U.S.A.
Trademarks used in this text: Dell™ and the DELL logo are trademarks of Dell Inc. LSI is a trademark or
registered trademark of LSI Corporation or its subsidiaries.
2013 - 04
1 rubber jumper 2 system-board jumper (PCN3)
1
2