User guide

11
2 Remove the four M3 screws securing the air baffles.
3 Lift the air baffles out of the sled cover.
Figure 1-10. Removing the Air Baffles
4 Remove the four M3 screws securing the mounting brackets.
5 Lift the mounting brackets away from the GPGPU blank. Save the mounting brackets.
6 Lift the GPGPU blank out of the sled cover. Save the GPGPU blank for future use.
Figure 1-11. Removing the Mounting Brackets and GPGPU Blank
1M3 screws (4) 2right air baffle
3 left air baffle 4 GPGPU blank
1 M3 screws (4) 2 front mounting bracket
3 back mounting bracket 4 GPGPU blank
3
2
1
4
1
2
3
4