Users Guide

The System Setup Main Menu page is displayed.
2. In the System Setup Main Menu page, select iDRAC Settings.
The iDRAC Settings page is displayed.
3. Select Lifecycle Controller.
4. Under Cancel Lifecycle Controller Actions, select Yes.
5. On the System Setup Main Menu page, select Finish to save the settings.
6. Select Yes to restart the system.
Using Lifecycle Controller for the first time
After you start Lifecycle Controller for the first time, by default the Initial Setup Wizard page is launched. Use this wizard to
set up the Language ,Keyboard Type, Network Settings, and iDRAC Network and Credentials.
Related concepts
Setting up Lifecycle Controller using Initial Setup Wizard on page 15
Related tasks
Updating firmware on page 34
Setting up Lifecycle Controller using Initial Setup Wizard
Use the Initial Setup Wizard to select the language and default keyboard settings, configure network settings, iDRAC network
and credential configuration, and view the summary of the settings.
Specifying language and keyboard type
1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.
2. On the left pane, click Settings.
3. On the Settings pane, click Language and Keyboard. Use the up-and down-arrow keys to select options.
● From the Language drop-down menu, select the language.
● From the Keyboard Type drop-down menu, select the keyboard type.
4. Click Next to save the new settings.
Viewing Product Overview
Use this page to see the overview of Lifecycle Controller and iDRAC. Click Next to continue.
NOTE:
For more information about the product, scan the QR code provided on this page by using a supported QR reader or
scanner and navigate to www.dell.com/idracmanuals
The Lifecycle Controller Network Settings page is displayed.
Configuring Lifecycle Controller Network Settings
Use this page to configure network settings for a NIC.
1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.
2. On the left pane, click Settings.
3. On the Settings pane, click Network Settings.
4. From the NIC Card drop-down menu, select the NIC port that you want to configure.
NOTE:
● You can use only one NIC at a time to communicate with the network.
Using Lifecycle Controller 15