Owners Manual

Figure 53. Installing the hard drive or SSD backplane
1.
hard drive or SSD backplane 2. hard drive or SSD backplane cable
3. retention screw (2) 4. screw hole on the hard drive or SSD cage (2)
5. guide pin 6. retention screw on the hard drive or SSD backplane cable
connector (2)
7. connector
1. Install the hard drives or SSDs in their original locations.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 51
Related tasks
Removing a hard drive or SSD on page 87
Removing the hard drive or SSD backplane on page 98
After working inside your system on page 52
Installing the hard drive or SSD cage on page 97
Installing a hard drive or SSD on page 89
PERC H730P slim card
The PERC H730P slim card is supported only on systems with eight 1.8-inch SSDs and two processors.
Removing a PERC H730P slim card
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
Installing and removing sled components 101