Owners Manual

Figure 56. Removing the PCIe extender or storage controller card
1.
retention screw (2) 2. slot on the PCIe extender or storage controller card
3. tab on the PCIe extender or storage controller card
support bracket
4. standoff (2)
1. Install the PCIe extender or storage controller card.
2. Install the following:
a. Hard drive or SSD cage
b. Hard drive or SSD backplane
c. Hard drives or SSDs
3. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 51
Related tasks
Before working inside your system on page 51
Installing the PCIe extender or storage controller card on page 105
After working inside your system on page 52
Removing a hard drive or SSD on page 87
Removing the hard drive or SSD backplane on page 98
Removing the hard drive or SSD cage on page 96
Installing the PCIe extender or storage controller card
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
Installing and removing sled components 105