Owners Manual

Figure 61. Installing the system board

hex nut screw (4) 2. system board

3. screw (10) 4. system board handle

1. Install the Trusted Platform Module (TPM). For information about how to install TPM, see the Installing the trusted platform

modules section. For information about TPM, see the Trusted Platform Module section.

2. Install the following:

a. Internal USB key

b. SD vFlash card

c. IDSDM or rSPI card

d. NDC or LOM riser card

e. PCIe mezzanine card

f. PCIe extender or storage controller card

g. Hard drive or SSD cage

h. Hard drive or SSD backplane

i. Hard drive(s) or SSD(s)

NOTE: Ensure that you reinstall the hard drives or SSDs in their original locations.

j. Cooling shroud

k. Memory modules

l. Processor(s) and heat sink(s)

3. Follow the procedure listed in the After working inside your system section.

Installing and removing sled components

113