Owners Manual

3. sled handle 4. release button
Related references
Safety instructions on page 51
Related tasks
Installing the sled on page 54
Installing the sled
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
CAUTION: To prevent damage to the I/O connectors, do not touch the connectors or the connector pins.
NOTE: Before installing the sleds, place the enclosure in the location that you want.
Follow the safety guidelines listed in safety instructions section.
1. If you are installing a new sled, remove the plastic cover from the I/O connector(s) and store for future use.
2. Press the release button on the sled handle to release the sled handle.
3. Align the sled with the sled bay in the enclosure.
4. Slide the sled into the enclosure until the sled connectors are firmly engaged with the midplane connectors.
5. Press the sled handle until the release button clicks into place.
Figure 9. Installing the sled
a. I/O connector cover
Turn on the sled.
54
Installing and removing sled components