Owners Manual

SD vFlash card

A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It provides persistent on-

demand local storage and a custom deployment environment that allows automation of server configuration, scripts, and

imaging. It emulates USB devices. For more information, see the Integrated Dell Remote Access Controller User’s Guide at

Dell.com/idracmanuals.

You can use an SD vFlash card with your system. The card slot is on the IDSDM card. You can remove and install the SD vFlash

card.

Replacing the SD vFlash card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform

troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by

your warranty. Read and follow the safety instructions that came with the product.

1. Follow the safety guidelines listed in safety instructions section.

2. Follow the procedure listed in the Before working inside your system section.

1. If installed, remove the SD vFlash card from the card slot.

NOTE: The SD vFlash card slot is near below the NDC.

2. Insert the contact-pin end of the SD card into the card slot on the vFlash media unit.

NOTE: The slot is keyed to ensure correct insertion of the card.

3. Press inward on the card to lock it into the slot.

Figure 27. Replacing the SD vFlash card

a. SD vFlash card

Installing and removing sled components