Owners Manual

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
1. Follow the safety guidelines listed in safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Follow the procedure listed in the Before working inside your system section.
4. Remove the PCIe mezzanine card. See the Removing the PCIe mezzanine card section.
1. Remove the two screws that secure the Network Daughter Card (NDC) to the system board.
2. Lift the card from the system board.
Figure 29. Removing the NDC
1.
slot on the NDC 2. screw (2)
3. NDC 4. standoff (2)
5. connector on the system board 6. tab projections
1. Install the NDC. See the Installing the Network Daughter Card section.
2. Install the PCIe mezzanine card. See the Installing the PCIe Mezz Card section.
3. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 51
Related tasks
Before working inside your system on page 51
Removing a PCIe mezzanine card on page 66
Installing the Network Daughter Card on page 79
Installing a PCIe mezzanine card on page 67
After working inside your system on page 52
78
Installing and removing sled components