Owners Manual

Figure 44. Installing a 2.5-inch hard drive blank
a. hard drive or SSD blank
b. release latch
Figure 45. Installing a 1.8-inch SSD blank
a. SSD blank
b. release latch
Shutdown procedure for servicing a hard drive or SSD
NOTE: This section applies only to situations where the sled must be powered down to service a hard drive or SSD.
If you need to service a hard drive or SSD, turn off the sled and before removing the hard drive or SSD wait for 30 seconds
after the sled indicator turns off. Otherwise, the hard drive or SSD may not be recognized after it is reinstalled and the sled is
turned on again.
92
Installing and removing sled components