Users Guide

console=ttyS1,115200n8r console=tty1
Dans l'exemple, console=ttyS1,57600 a été ajouté à la première option.
Activation de l'ouverture de session dans la console virtuelle après le
démarrage
Dans le fichier /etc/inittab, ajoutez une nouvelle ligne pour configurer agetty sur le port série COM2 :
co:2345:respawn:/sbin/agetty -h -L 57600 ttyS1 ansi
L'exemple suivant montre un fichier avec la nouvelle ligne.
#inittab This file describes how the INIT process should set up #the system in
a certain run-level. #Author:Miquel van Smoorenburg #Modified for RHS Linux by
Marc Ewing and Donnie Barnes #Default runlevel. The runlevels used by RHS are:
#0 - halt (Do NOT set initdefault to this) #1 - Single user mode #2 -
Multiuser, without NFS (The same as 3, if you do not have #networking) #3 -
Full multiuser mode #4 - unused #5 - X11 #6 - reboot (Do NOT set initdefault to
this) id:3:initdefault: #System initialization. si::sysinit:/etc/rc.d/
rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/
rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/
rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 #Things to run in every runlevel. ud::once:/
sbin/update ud::once:/sbin/update #Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/
shutdown -t3 -r now #When our UPS tells us power has failed, assume we have a
few #minutes of power left. Schedule a shutdown for 2 minutes from now. #This
does, of course, assume you have power installed and your #UPS is connected and
working correctly. pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System
Shutting Down" #If power was restored before the shutdown kicked in, cancel it.
pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
#Run gettys in standard runlevels co:2345:respawn:/sbin/agetty -h -L 57600
ttyS1 ansi 1:2345:respawn:/sbin/mingetty tty1 2:2345:respawn:/sbin/mingetty
tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5 6:2345:respawn:/sbin/mingetty tty6 #Run xdm
in runlevel 5 #xdm is now a separate service x:5:respawn:/etc/X11/prefdm -
nodaemon
Dans le fichier/etc/securetty, ajoutez une ligne avec le nom du terminal série tty pour COM2:
ttyS1
L'exemple suivant montre un fichier avec la nouvelle ligne.
REMARQUE : Uutilisez la séquence de touches d'arrêt (~B) pour exécuter les commandes de
touches Magic SysRq Linux sur une console série à l'aide de l'outil IPMI.
vc/1 vc/2 vc/3 vc/4 vc/5 vc/6 vc/7 vc/8 vc/9 vc/10 vc/11 tty1 tty2 tty3 tty4
tty5 tty6 tty7 tty8 tty9 tty10 tty11 ttyS1
Schémas cryptographiques SSH pris en charge
Pour communiquer avec iDRAC en utilisant le protocole SSH, iDRAC prend en charge les schémas
cryptographiques répertoriés dans le tableau suivant.
152