User Manual

Type TLV Description

and the port identification of the

LAG. The Dell Networking OS

does not currently support this

TLV.

127 Maximum Frame Size Indicates the maximum frame

size capability of the MAC and

PHY.

LLDP-MED Capabilities TLV

The LLDP-MED capabilities TLV communicates the types of TLVs that the endpoint device and the

network connectivity device support. LLDP-MED network connectivity devices must transmit the

Network Policies TLV.

• The value of the LLDP-MED capabilities field in the TLV is a 2–octet bitmap, each bit represents an

LLDP-MED capability (as shown in the following table).

• The possible values of the LLDP-MED device type are shown in the following. The Dell Networking

system is a network connectivity device, which is Type 4.

When you enable LLDP-MED in Dell Networking OS (using the advertise med command), the system

begins transmitting this TLV.

Figure 22. LLDP-MED Capabilities TLV

Table 10. Dell Networking OS LLDP-MED Capabilities

Bit Position TLV Dell Networking OS Support

0 LLDP-MED Capabilities Yes

1 Network Policy Yes

2 Location Identification Yes

3 Extended Power via MDI-PSE Yes

4 Extended Power via MDI-PD No

5 Inventory No

6–15 reserved No

Link Layer Discovery Protocol (LLDP)

141