User Manual

Fcf Priority 128
Config-State ACTIVE
Oper-State UP
Members
Fc 0/9
Te 0/11 Te 0/12
Table 23. show fcoe-map Field Descriptions
Field Description
Fabric-Name Name of a SAN fabric.
Fabric ID The ID number of the SAN fabric to which FC traffic is forwarded.
VLAN ID The dedicated VLAN used to transport FCoE storage traffic between
servers and a fabric over the NPG. The configured VLAN ID must be the
same as the fabric ID.
VLAN priority FCoE traffic uses VLAN priority 3. This setting is not user-configurable.
FC-MAP FCoE MAC-address prefix value - The unique 24-bit MAC address prefix
that identifies a fabric.
FKA-ADV-period Time interval (in seconds) used to transmit FIP keepalive
advertisements.
FCF Priority The priority used by a server to select an upstream FCoE forwarder.
Config-State Indicates whether the configured FCoE and FC parameters in the FCoE
map are valid: Active (all mandatory FCoE and FC parameters are
correctly configured) or Incomplete (either the FC-MAP value, fabric ID,
or VLAN ID are not correctly configured).
Oper-State Operational status of the link to the fabric: up (link is up and
transmitting FC traffic), down (link is down and not transmitting FC
traffic), link-wait (link is up and waiting for FLOGI to complete on peer
FC port), or removed (port has been shut down).
Members Aggregator with the FC ports, which are members of the dedicated
FCoE VLAN that carries storage traffic to the specified fabric.
show qos dcb-map Command Examples
Dell# show qos dcb-map dcbmap2
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50 PFC:OFF
Priorities:0 1 2 4 5 6 7
PG:1 TSA:ETS BW:50 PFC:ON
Priorities:3
262
NPIV Proxy Gateway