User Manual

%S50N:0 %DIFFSERV-2-DSA_DEVICE_BUFFER_UNAVAILABLE: Unable to allocate dedicated
buffers for stack-unit 0, port pipe 0, egress port 25 due to unavailability of
cells.
Dell Networking OS Behavior: When you remove a buffer-profile using the no buffer-profile [fp
| csf]
command from CONFIGURATION mode, the buffer-profile name still appears in the output of
the show buffer-profile [detail | summary] command. After a stack unit reset, the buffer
profile correctly returns to the default values, but the profile name remains. Remove it from the
show
buffer-profile [detail | summary] command output by entering no buffer [fp-uplink |
csf] stack-unit port-set buffer-policy from CONFIGURATION mode and no buffer-
policy
from INTERFACE mode.
To display the allocations for any buffer profile, use the show commands.
To display the default buffer profile, use the show buffer-profile {summary | detail} command
from EXEC Privilege mode.
Example of Viewing the Default Buffer Profile
Dell#show buffer-profile detail interface tengigabitethernet 0/1
Interface tengig 0/1
Buffer-profile -
Dynamic buffer 194.88 (Kilobytes)
Queue# Dedicated Buffer Buffer Packets
(Kilobytes)
0 2.50 256
1 2.50 256
2 2.50 256
3 2.50 256
4 9.38 256
5 9.38 256
6 9.38 256
7 9.38 256
Example of Viewing the Buffer Profile Allocations
Dell#show running-config interface tengigabitethernet 0/6 !
interface TenGigabitEthernet 0/6
mtu 9252
switchport
no shutdown
buffer-policy myfsbufferprofile
Example of Viewing the Buffer Profile (Interface)
Dell#show buffer-profile detail int te 0/2
Interface Te 0/2
Buffer-profile fsqueue-fp
Dynamic buffer 1256.00 (Kilobytes)
Queue# Dedicated Buffer Buffer Packets
Kilobytes)
0 3.00 256
1 3.00 256
2 3.00 256
3 3.00 256
4 3.00 256
Debugging and Diagnostics
279