User Manual

0 packets, 0 bytes

0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts

0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts

0 Multicasts, 0 Broadcasts

0 runts, 0 giants, 0 throttles

0 CRC, 0 overrun, 0 discarded

Output Statistics:

0 packets, 0 bytes, 0 underruns

0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts

0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts

0 Multicasts, 0 Broadcasts, 0 Unicasts

0 throttles, 0 discarded, 0 collisions, 0 wreddrops

Rate info (interval 299 seconds):

Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate

Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate

Time since last interface status change: 05:29:16

To view only configured interfaces use the show interfaces configured command in EXEC Privilege

mode.

To determine which physical interfaces are available, use the show running-config command in EXEC

mode. This command displays all physical interfaces available on the switch, which is as shown in the

following example.

Dell#show running-config

Current Configuration ...

! Version 1-0(0-4)

! Last configuration change at Tue Mar 25 04:50:51 2014 by default

boot system stack-unit 0 primary tftp://10.11.8.12/dv-ci-stomp-tc-1-a1

redundancy auto-synchronize full

redundancy disable-auto-reboot stack-unit

logging coredump stack-unit all

hostname Dell

enable password 7 b125455cf679b208e79b910e85789edf

username admin password 7 1d28e9f33f99cf5c

enable restricted 7 e0f78bb16023c392

vlt domain 1

stack-unit 0 provision PE-FN-410S-IOA

--More--

Interfaces