Manual
Table Of Contents
- Contents
- About this document
- Introducing the SAN I/O Module
- Configuring the SAN I/O Module
- Items required
- Modify the SAN I/O Module IP address
- Connecting the SAN I/O Module to the Ethernet network
- Connecting the SAN I/O Module to the fabric
- Changing from Fabric OS Native to Access Gateway mode
- Changing from Access Gateway mode to Fabric Switch mode
- Activating Ports on Demand (POD)
- Connecting to the SAN I/O Module Using Web Tools
- Operating the SAN I/O Module
- Interoperability
- Accessing the SAN I/O Module
- Interpreting POST results
- Interpreting LED activity
- Removing and replacing the SAN I/O Module
- Access Gateway Mode default port mapping
- Processor and memory specifications
- Weight and physical dimensions
- Facility requirements
- Electrical
- Architectural specification
- Supported HBAs
- Fibre Channel standards compliance
- Regulatory compliance
- Environmental regulation compliance
- Index
26 M5424 SAN I/O Module Hardware Reference Manual
53-1001082-01
Weight and physical dimensions
A
Weight and physical dimensions
Table 6 lists the weight and physical dimensions of the SAN I/O Module.
Facility requirements
The information in Table 7 shows the operating and non-operating limitations of the Brocade
M5424 Fibre Channel SAN I/O Module SAN I/O Module.
TABLE 6 SAN I/O Module Specifications
Dimension Measurements
Height 1.27 in (32.48 mm)
Width 10.74 in (272.75 mm)
Depth 12.09 in (307.24 mm)
Weight 4.65 (2.10 kg) — without media
TABLE 7 Environmental Requirements
Condition Operating Non-operating
Temperature 32°F to 104°F (0°C to 40°C) -4°F to 158°F (-20°C to 70°C)
Humidity 10% to 90%, non-condensing at
84.2°F (29°C)
5% to 95%, non-condensing at
100.4 °F (38°C)
Altitude Up to 10,000 ft (3,048 m) 35,000 ft (10,668 m)
Shock 20 G for 6 ms 50G with velocity change of 4216
mm/sec squared
Vibration 0.4 G at 5-500 Hz
for 60 minutes
0.5 G at 2-200 Hz for 15 minutes
Air flow 86 °F (30°C) Ambient: Approx. 3CFM
104°F (40°C) Ambient: Approx.
9CFM
None required