Owner manual

1
Quick Start Guide
Installation Instructions
This Quick Start Guide describes how to install and configure your new QLogic SANblade
®
host bus adapter (HBA) and
SANsurfer Pro management application in four simple steps:
❑ Step 1. Verify the package contents.
❑ Step 2. Install the HBA hardware.
❑ Step 3. Install the HBA driver.
❑ Step 4. Install the SANsurfer Pro management application.
Keep the HBA in the antistatic bag until installation. The HBA contains parts that can be damaged by
electrostatic discharge (ESD). Before handling the HBA, use standard methods to discharge static
electricity. Place the HBA on the bag when examining it. Retain the bag for future use.
Step 1. Verify the Package Contents
The QLogic HBA is shipped with the following items:
❑ QLogic SANblade HBA
❑ Low-profile bracket (not available in all models)
❑ Dell Documentation Kit
CAUTION!