Users Guide

• No Configuration — indicates that the NIC must not be configured.

• DHCP — indicates that the NIC must be configured using an IP address from a DHCP server. If

DHCP is selected, a DHCP IP address is displayed on the Network Settings page.

• Static IP — indicates that the NIC must be configured using a static IP. Type the IP Address

Properties — IP Address, Subnet Mask, Default Gateway, and DNS Address. If you do not have

this information, contact your network administrator.

6. Click Enabled and type the VLAN ID and Priority under Lifecycle Controller VLAN Settings to

configure the VLAN settings of a NIC.

You cannot configure the VLAN settlings of the following NICs:

• Emulex SeaHawk-2 (FH) PCIe Adapter

• Emulex SeaHawk-2 (LP) PCIe Adapter

• Emulex Vindicator-2 rNDC

• Emulex Sea Stallion-2 Mezzanine Card

• Emulex Pave Low-2 bNDC

• Emulex SeaHawk-2 (FH) NIC Only PCIe Adapter

• Emulex SeaHawk-2 (LP) NIC Only PCIe Adapter

• Emulex Vindicator-2 NIC Only rNDC

• Emulex Sea Stallion-2 NIC Only Mezzanine Card

• Emulex Pave Low-2 NIC Only bNDC

7. Click Next.

NOTE: If Lifecycle Controller settings are not correctly configured, an error message is

displayed.

NOTE: If you are unable to connect to a network, verify the settings. For information about

correct network settings, contact your network administrator.

Lifecycle Controller features

This section provides a brief description about the Lifecycle Controller features and helps you understand

how to use the Lifecycle Controller wizards most effectively. Each feature is a wizard in Lifecycle

Controller, which supports the following features:

• Home — Navigate back to the Home page.

• Lifecycle Log — View and export the Lifecycle Controller log, and add a work note to the log.

• Firmware Update — Apply updates or perform firmware rollback for the system components, and

view the firmware version available on a server.

• Hardware Configuration — Configure system devices, view, export hardware inventory of a system,

and repurpose or retire system.

• OS Deployment — Install an operating system in manual mode or unattended mode by using an

'answer' file.

• Platform Restore — Backup, export, and restore system profile. Import iDRAC license from Lifecycle

Controller GUI.

• Hardware Diagnostics — Perform diagnostics to validate the memory, I/O devices, CPU, physical

disks, and other peripherals.

• Settings — Specify the language, keyboard layout, and network settings while using Lifecycle

Controller.

• System Setup — Configure settings for devices or components such as iDRAC, BIOS, RAID, and NIC.