Users Guide

To export the Lifecycle Log:

1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.

2. In the left pane, click Lifecycle Log.

3. In the right pane, click Export Lifecycle Log.

4. Select either USB Drive or Network Share.

For more information, see Exporting Lifecycle Log To A USB Drive or Exporting Lifecycle Log To A

Network Share.

When you select Network Share, to verify connection, click Test Network Connection. Lifecycle

Controller pings the Gateway IP, DNS server IP, and host IP.

NOTE: Lifecycle Controller cannot ping the domain name and cannot display the IP address if

the DNS is not able to resolve the domain name. Make sure that the issue with DNS is resolved

and retry.

5. Click Finish.

The Lifecycle Log is exported to the specified location.

Related Links

Exporting hardware inventory to a USB drive

Exporting hardware inventory to a network share

Exporting Lifecycle Log to a USB drive

To export the Lifecycle Log to a USB drive:

1. From the Select Device drop-down menu, select a USB drive.

2. In the File path box, type a valid directory or subdirectory path on the device. If the path is not

provided, the file is stored in the root location of the device.

For example, 2014\Nov.

NOTE: Lifecycle Controller allows 256 characters in a path that includes the file name and file

extension. For example, if 56 characters are used for file name and extension, only 200 characters

can be used for the path. Lifecycle Controller does not support these characters -:, *,?,",<,>,|,#,%,^,

and SPACE.

Exporting Lifecycle Log to a network share

To export to a network share, select CIFS or NFS and type the required details.

CIFS

For CIFS, type the following details:

• Share Name — Type the server IP or host name followed by the root of the network share. Examples:

\\192.168.0.120\sharename or \\hostname\sharename.

• Domain and User Name — Type the domain and user name required to log on to the network share.

If there is no domain, type the user name.

• Password — Type the correct password.

• File Path — Type the sub-directories, if any. For example, 2015\Nov.