Users Guide

Menu Item Description

Launch System

Setup

Enables you to access the System Setup.

System Utilities Enables you to access the BIOS Update File Explorer, run the Dell Diagnostics

program, and reboot the system.

UEFI Boot menu

Menu Item Description

Select UEFI Boot

Option

Displays the list of available UEFI boot options (marked with asterisks), select the

boot option you wish to use and press <Enter>.

Add Boot Option Adds a new boot option.

Delete Boot

Option

Deletes an existing boot option.

Boot From File Sets a one-time boot option not included in the boot option list.

Embedded system management

The Dell Lifecycle Controller provides advanced embedded systems management throughout the

system’s lifecycle. The Dell Lifecycle Controller can be started during the boot sequence and can

function independently of the operating system.

NOTE: Certain platform configurations may not support the full set of features provided by the Dell

Lifecycle Controller.

For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware,

and deploying the operating system, see the Dell Lifecycle Controller documentation at Dell.com/

idracmanuals.

iDRAC settings utility

The iDRAC Settings utility is an interface to set up and configure the iDRAC parameters using UEFI. You

can enable or disable various iDRAC parameters using the iDRAC Settings Utility.

NOTE: Accessing some of the features on the iDRAC Settings Utility requires the iDRAC Enterprise

License upgrade.

For more information on using iDRAC, see the Integrated Dell Remote Access Controller (iDRAC8) and

iDRAC7 User’s Guide at dell.com/esmmanuals.

Entering the iDRAC settings utility

1. Turn on or restart the managed system.

2. Press <F2> during POST.

3. In the System Setup Main Menu page, click iDRAC Settings.

The iDRAC Settings screen is displayed.