Hardware Owner's Manual

126 About Your System
FBD training
error: The
following branch
has been disabled:
Branch x.
The specified branch
(channel pair) contains
DIMMs that are
incompatible with each
other.
Ensure that only Dell
qualified memory is used.
Dell recommends
purchasing memory upgrade
kits directly from dell.com
or your Dell sales agent to
ensure compatibility.
Gate A20 failure. Faulty keyboard controller
(faulty blade board).
See "Getting Help" on
page 361.
General Failure. Operating system
corrupted or improperly
installed.
Reinstall the operating
system.
HyperTransport
error caused a
system reset.
Please check the
system event log
for details.
HyperTransport error. See "Getting Help" on
page 361.
Invalid
flexAddress for
bus, device,
function.
FlexAddress (virtual
MAC) is not supported on
the specified device.
Information only.
Keyboard
controller
failure.
Faulty keyboard controller
(faulty blade board).
See "Getting Help" on
page 361.
Keyboard failure. Loose or improperly
connected keyboard cable.
Ensure that the keyboard is
properly connected. If the
problem persists, replace the
keyboard.
Table 1-27. Blade Messages
(continued)
Message Causes Corrective Actions