Hardware Owner's Manual

150 Using the System Setup Program and UEFI Boot Manager

Entering the UEFI Boot Manager

Turn on or restart your system.

Press <F11> after you see the following message:

<F11> = UEFI Boot Manager

NOTE: The system does not respond until the USB keyboard is active.

NOTE: The Boot Mode option in System Setup must be set to UEFI to access

the UEFI Boot Manager.

If your operating system begins to load before you press <F11>, allow the

system to finish booting, and then restart your system and try again.

UEFI Boot Manager Screen

UEFI Boot Settings Screen

Option Description

Continue Selecting this option executes the current boot options

in listed order.

<Boot options> The list of current boot options is displayed, with an

asterisk. Select the boot option you wish to use and

press <Enter>.

UEFI Boot Settings Enables you to add, delete, enable, disable, and change

boot options, or execute a one-time boot option.

System Utilities Enables you to access the legacy System Setup program,

System Services, and BIOS-level boot options.

Option Description

Add Boot Option Adds a new boot option.

Delete Boot Option Deletes an existing boot option.

Enable/Disable Boot

Option

Disables and enables a boot option in the boot option

list.

Change Boot Option Changes the order of the boot option list.

One-Time Boot From File Sets a one-time boot option not included in the boot

option list.