Hardware Owner's Manual

Installing Blade Components 231
Installing the RAID Battery
1 Insert the battery.
For systems with a battery carrier:
a Insert the RAID battery into the battery carrier. See Figure 3-29.
b Align the tabs on the battery carrier with the battery carrier slots on
the chassis.
c Slide the battery carrier into the battery carrier slots until it locks into
place. See Figure 3-29.
For PowerEdge M910, slide the battery in to secure the tabs on the RAID
battery in the battery carrier on the system board (see Figure 3-30).
For PowerEdge M710, M610, and M610x, slide the battery in to secure the
tabs on the RAID battery to the metal standoffs on the system board (see
Figure 3-31 and Figure 3-32).
2 Connect the battery cable to the connector on the storage card.
3 Close the system. See "Closing the Blade" on page 161.
4 Install the blade. See "Installing a Blade" on page 158.