Hardware Owner's Manual

Installing Blade Components 241

Figure 3-38. Installing or Removing Cables Connecting the Expansion-Card Riser to the

Midplane Interface Card (PowerEdge M610x Only)

If installed, remove the expansion card(s) from the expansion-card slot(s).

See "Removing an Expansion Card" on page 238.

1 midplane interface card 2 data cable 4

3 power cable connecting midplane

interface card to expansion-card

riser

4 expansion-card riser

5 expansion card 6 power cables connecting midplane

interface card to expansion cards (2)

NOTE: You may use both power

connections depending on the power

requirements of the expansion card.

7 data cable 3