Hardware Owner's Manual

Installing Enclosure Components 301

Figure 4-8. Removing and Installing the Front Module Cage Assembly

NOTE: The empty cage assembly weighs 21 kg (47 lbs). Obtain assistance when

removing the cage assembly from the enclosure.

Slide the cage out from the enclosure. See Figure 4-8.

Disconnect the control-panel cable from the midplane by pressing the

small latch at each end of the connector.

Remove the four T-15 Torx screws securing the midplane to the back of

the front cage assembly, and remove the midplane. See Figure 4-9.

1 front module cage assembly 2 enclosure

3 screws (4)