Hardware Owner's Manual

About Your System 77
Cisco Ethernet Switch
Your system supports three Cisco Catalyst Blade Switch (CBS) versions:
• The Cisco 3130G-S switch includes four 10/100/1000 Mb Ethernet uplink
ports and two Stackwise Plus ports.
• The Cisco CBS 3130X-S switch includes four 10/100/1000 Mb Ethernet
uplink ports,
two 10 Gb uplink ports, and two Stackwise Plus ports.
• The Cisco CBS 3032 switch includes four 10/100/1000 Mb Ethernet
uplink ports.
The two option bays support the following module options:
• Cisco X2 10 Gb transceiver modules (CBS 3130X-S only)
• Cisco TwinGig converter modules
All three switches include a RJ-45 console connector for switch management.
Sixteen internal Gb Ethernet connectors link to the blades in the enclosure.
See Figure 1-32.
For additional information about the Cisco CBS Ethernet switch modules,
see the documentation that shipped with the module. For general
information on installing this module, see "I/O Modules" on page 296.
Module status
indicator
Off Switch is not ready
Blue on Switch operating normally
Amber on or
blinking
Fault condition in module
Module power
indicator
Off Power to the module is off
Green Module has power
Table 1-21. Cisco SFS M7000e Infiniband Switch Indicators
(continued)
Indicator Type Pattern Description