Owners Manual

Management module indicator codes

Figure 11. Management module indicators

1. Status indicator, Identification button/ Indicator -

Dual color: Blue and amber

2. Power indicator - Green

Table 7. Management module indicator behavior

Status Indicator combination

Healthy chassis/ Management module

(Standby)

Power indicator ON (green), status indicator OFF

Healthy chassis/ Management module (Active) Power indicator ON (green), status indicator blue ON

Healthy chassis/ Management module

(Identifying mode)

Power indicator ON (green), status indicator blue blinking

NOTE: Available only when the management module is active.

Faulty chassis/ Management module (Active) Power indicator ON (green), status indicator amber blinking

Faulty chassis/ Management module

(Identifying mode)

Power indicator ON (green), status indicator blue blinking

Failed chassis/ Management module: Mode 1 Power indicator OFF, status indicator OFF

NOTE: Hardware failure prevents the management module from

powering.

Failed chassis/ Management module: Mode 2 Power indicator OFF, status indicator Amber-solid

NOTE:

• The management module starts boot but is unable to boot to one or

more operating system partitions.

• The management module boots but detects a failure such as a network

switch failure, or a voltage regulator failure.

Locating the information tag of your system

You can identify your system using the unique express service code and Service Tag. Pull out the information tag in front of the system to

view the express service code and Service Tag. Alternatively, the information may be on a sticker on the back of the system chassis. The

mini Enterprise Service Tag (EST) is found on the back of the system chassis. Dell uses this information to route support calls to the

appropriate personnel.

Enclosure overview