Owners Manual

Log in to the management module
You can log in to management module as:
Management module user
Microsoft Active Directory user
Lightweight Directory Access Protocol (LDAP) user
If you have opted for secure default access to management module, the management module secure default password is available on the
information tag available on the front of the enclosure. If you have not opted for secure default access to management module, then the
default user name and password are root and calvin. You can also log in by using Single Sign-On or Smart Card.
NOTE: You must have the management module credentials to log in to management module.
NOTE: Ensure that you change the default username and password after setting up the management module IP address.
For more information about logging in to the management module, see the Dell EMC OpenManage Enterprise Modular User's Guide at
www.dell.com/manuals.
Methods of setting up and configuring the IP address for the
management module
You can configure management module IP using the following:
1. Management module web interface
2. Remote Access Controller ADMin (RACADM)
3. Remote Services that include Web Services Management (WS-Man)
Methods to download firmware and drivers
You can download the firmware and drivers by using any of the following methods:
Table 8. Firmware and drivers
Methods Location
From the Dell EMC support site www.dell.com/support/home
Using Dell Repository Manager (DRM) www.dell.com/openmanagemanuals > Repository Manager
Using Dell OpenManage Essentials www.dell.com/openmanagemanuals > OpenManage Essentials
Using Dell OpenManage Enterprise www.dell.com/openmanagemanuals > OpenManage Enterprise
Using Dell Server Update Utility (SUU) www.dell.com/openmanagemanuals > Server Update Utility
Using OpenManage Enterprise Modular www.dell.com/openmanagemanuals > OpenManage Enterprise
Modular
Downloading drivers and firmware
Dell EMC recommends that you download and install the latest BIOS, drivers, and systems management firmware on your system.
Prerequisites
Ensure that you clear the web browser cache before downloading the drivers and firmware.
Steps
1. Go to www.dell.com/support/home.
2. In the Drivers & Downloads section, type the Service Tag of your system in the Enter a Service Tag or product ID box, and then
click Submit.
20
Initial system setup and configuration