Owners Manual

Creating a group

To create a stand-alone chassis group

Steps

1. From the selected home screen, tap Settings.

2. Tap Manage Group.

3. To create a group, tap Select Group.

NOTE: A confirmation message is displayed.

NOTE: It may take several minutes to update the available group names.

Joining a group

To join a stand-alone chassis group

Steps

1. From the selected home screen, tap Settings.

2. Tap Manage Group.

3. To join a group, tap Join Group.

NOTE: If no available groups, an error message is displayed.

NOTE: If there are available groups, a list of available group names is displayed.

Leaving a group

To leave a member chassis group

Steps

1. From the selected home screen, tap Settings.

2. Tap Manage Group.

3. To exit a group, tap Leave Group.

NOTE: A confirmation message is displayed.

Deleting a group

To delete a lead chassis group

Steps

1. From the selected home screen, tap Settings.

2. Tap Manage Group.

3. To exit a group, tap Leave Group.

NOTE: A confirmation message is displayed.

Assigning an IP address out-of-the-box

About this task

The PowerEdge MX7000 enclosure offers out-of-the-box IP address assignment using the LCD touch panel. For more information about

the LCD, see LCD touch panel.

Initial system setup and configuration