Owners Manual

Steps
1. To set up the IP address out-of-the-box:
1. Select the Language, and tap Next.
The select Home Page screen is displayed.
2. Tap Preview, to view the default Home page view.
The available Home page views are:
• Main Menu
• IP Settings
• System Info
• Custom Text String
The Home Page Preview screen is displayed.
3. Tap Save to store the settings.
NOTE: You can tap Home Pages to view the selected Home Page screen.
Configuring the Static IP address using the LCD
Steps
1. The PowerEdge MX7000 enclosures LCD touch panel enables you to configure the Static or the DHCP IP address.
To configure the Static IP address:
1. From the selected home screen, tap Settings.
2. Tap Network Settings.
3. Select IPv4, and tap Edit.
The Change IP settings from DHCP to Static? screen is displayed.
4. Tap Yes.
5. Update the IPv4 octet, and tap Next.
6. Edit the Mask octet, and tap Next.
7. Edit the Gateway octet, and tap Save.
The Success screen is displayed.
NOTE: If the IP address is incorrect, an Error screen is displayed.
Configuring the DHCP IP address using the LCD
Steps
1. To configure the DHCP IP address:
1. From the selected home screen, tap Settings.
2. Tap Network Settings.
3. Select IPv6 and, tap Edit.
The Change IP settings from DHCP to Static? screen is displayed.
4. Tap Yes.
5. The network IP address is automatically updated in the enclosure.
The Success screen is displayed.
NOTE: If the IP address is incorrect an Error screen is displayed.
Initial system setup and configuration 23