Owners Manual

Figure 35. Installing a MX7000 module into Fabric C slot
Next steps
1. Connect the cables to the module.
NOTE:
Ensure that the SAS IOMs have the same firmware version. The OpenManage-Enterprise modular User interface
allows you to view the firmware details. For more information, see OpenManage Enterprise-Modular User's Guide .
Removing a management module blank
Steps
1. Press the release button to release the blank.
2. Pull the blank out of the enclosure.
NOTE: To maintain proper airflow, ensure that the blanks are installed if the management module is not installed.
Installing and removing system components 45