Owners Manual
Figure 2. Next Generation Modular - Back view
The Dell EMC PowerEdge MX7000 enclosure supports the following sleds and I/O modules:
• I/O modules -
○ Dell EMC Networking MX7116n Fabric Expander Module
○ Dell EMC Networking MX9116n Fabric Switching Engine
○ Dell EMC Networking MX5108n Ethernet Switch
○ Dell EMC Networking MXG610s Fibre Channel Switch
○ Dell EMC M9002m Management Module
○ Dell EMC PowerEdge MX5000s SAS Switch
• Ethernet Pass-Through Module -
○ Dell EMC PowerEdge MX 10GBASE-T Ethernet Pass-Through Module
○ Dell EMC PowerEdge MX 25 Gb Ethernet Pass-Through Module
• MX740c
The PowerEdge MX740c is a single-width compute sled that supports:
○ Up to two Intel Xeon Scalable Processors
○ Up to 24 DIMM slots
○ Up to six 2.5-inch SAS, SATA, SSD, or NVMe drives
• MX840c
The PowerEdge MX840c is a double-width compute sled that supports:
○ Up to four Intel Xeon Scalable Processors
○ Up to 48 DIMM slots
○ Up to eight 2.5-inch SAS, SATA, SSD, or NVMe drives
• MX5016s
8
Next Generation Modular overview