Users Guide

Updating OME-Modular to 1.10.10
If the current version of OME-Modular on your system is 1.00.01 or 1.00.10, you must first update the OME-Modular version to
1.10.10 before updating to OME-Modular 1.10.20.
Perform the following steps to update to 1.10.10:
1. Click Devices > Chassis.
A list of all the available chassis is displayed.
2. In the list header, select the checkbox to select all the chassis on the current page. If there are multiple pages, then go to
each page and select the checkbox.
3. After all the chassis are selected, click Update Firmware.
4. In the pop-up wizard, select the individual package and click Browse to select the OpenManage Enterprise Modular
1.10.10 DUP.
5. After the DUP is uploaded, click Next and select the Compliance checkbox.
6. Click Finish to start the update on all chassis.
7. Allow the job to complete and the device communication in the MCM group to be reestablished.
8. Log in to OME-Modular and on the MCM dashboard, confirm that all member chassis in the group are available.
9. From the OME-Modular web interface of the lead chassis, go to the Overview page of all the member chassis and confirm
that the graphics of the chassis and chassis sub systems load.
10. Go the Alerts > Alert Log page and check if an alert storm is in-progress.
An alert storm is defined as several alerts generated per second. If an alert stop is in-progress, wait for it to stop.
11. Continue with updating the other OME-Modular firmware.
B
Updating OME-Modular to 1.10.10 117