Users Guide
New in this release
This release of OME-Modular supports:
● Deploying templates on empty slots or slots that compute sleds occupy.
● Reclaiming MAC identities after removing profiles that are associated with blade servers.
● Synchronizing VLAN definitions of OME-Modular and OpenManage Enterprise.
● Alert notifications when a chassis is onboarded.
● Configuring Forward Error Correction (FEC) for SmartFabrics.
● Propagating VLANs without server reboot.
● Deploying operating system using Boot to ISO after applying profile.
● Enhancements to Uplink Failure Detection.
● Enabling racadm connect to Brocade MXG610s.
● Performing Hard Reset only on iDRAC instead of whole sled.
● Setting Name field as the default sort order in device grids.
● Enhanced alert pop-ups to appear on the upper right corner of the user interface.
● New SmartFabric Uplink type—Ethernet - No Spanning Tree.
● Reduction in alert volumes API to replace failed Ethernet switch Autodetection of Scalable Fabric expansion from one to two
chassis.
Supported platforms
OME - Modular supports the following platforms and components:
Platforms:
● PowerEdge MX7000
● PowerEdge MX740c
● PowerEdge MX840c
● PowerEdge MX5016s
● PowerEdge MX5000s SAS Switch
● PowerEdge MX 25 Gb Ethernet Pass-Through Module
● MX 10GBASE-T Ethernet Pass-Through Module
● Dell EMC MX9116n Fabric Switching Engine
● Dell EMC MX5108n Ethernet Switch
● Dell EMC MX7116n Fabric Expander Module
● Dell EMC MXG610s Fibre Channel Switching Module
● PowerEdge MX9002m Management module
Supported web browsers
OME–Modular is supported on the following web browsers:
● Google Chrome version 63
● Google Chrome version 64
● Mozilla Firefox version 57
● Mozilla Firefox version 58
● Microsoft EDGE
● Microsoft Internet Explorer 11
● Safari version 11
For the OME–Modular web interface to load properly in the web browsers, ensure that the Active X/Java script and font
download options are enabled.
NOTE: OME–Modular supports TLS 1.2 and later versions.
Overview 9