Users Guide

NOTE: The HTTPS share feature with proxy does not work when authentication is enabled for both the proxy and

HTTPS share.

4. Select the mode of updating the catalog.

The available options are:

● Manually

● Automatically

The default mode is manual.

5. Select the Update Frequency.

● Daily

● Weekly

The time can be in HH:MM format.

Editing catalogs

You can only modify the catalog name, network share address, and catalog filepath.

To edit catalogs:

1. On the Catalog Management page, select the catalog that you want to edit and click Edit.

The Edit Firmware Catalog window is displayed.

2. Make the required changes.

Checking for catalog updates

You can check for catalog updates on the Catalog Management page manually or automatically, and download them. If the

check is scheduled on a weekly basis, and update is unavailable or the site is not reachable, OME-Modular cancels the scheduled

check. Run the next check, manually. The manual check prevents unnecessary checks if the catalog is moved or deleted.

To check for catalog updates:

1. On the Firmware Compliance page, click Catalog Management.

The Catalog Management page, with the list of available catalogs, is displayed.

2. Select the catalog, which you want to check for updates and click Check for update.

A message confirming the check is displayed.

Deleting catalogs

You can only delete catalogs that are not associated with a baseline. If you attempt deleting a catalog that is associated with a

baseline, an error message is displayed.

To delete a catalog:

On the Catalog Management page, select the catalog that you want to delete and click Delete.

Updating firmware

Before updating the firmware on a chassis, compute, or storage sleds, ensure that all IOMs and network fabrics are healthy.

NOTE:

It is recommended that not more than two IOMs running different SmartFabrics, or four IOMs running full switch

mode are updated simultaneously.

NOTE: The Update Firmware button may be disabled temporarily during inventory refresh when a Refresh Inventory job

or Default Inventory job is run.

To update firmware:

1. On the Compliance Report page, select the device or component for which you want to update the firmware.

The Update Firmware window is displayed.

Managing firmware