CLI Guide

? -- list racadm subcommand description
? <subcommand> -- display usage summary for a subcommand
arp -- display the networking arp table
chassisaction -- execute chassis or switch power-up/down/cycle or
config -- modify OME-Modular configuration properties
...
setniccfg -- modify network configuration properties
traceroute -- determine the route of a packet
traceroute6 -- determine the route of a packet
Example for RACADM ? <
subcommand >
racadm ? getsysinfo
getsysinfo -- display general OME-Modular and system information
Usage:
racadm getsysinfo [-d] [-c] [-4] [-6]
-----------------------------------------------------------
Valid Options:
-d : show OME-Modular information
-c : show chassis information
-4 : show OME-Modular IPv4 information
-6 : show OME-Modular IPv6 information
help and help with subcommand
Description
Lists all the subcommands available for use with RACADM and provides a short description for each. You
may also type a subcommand, group, object, or FQDD alternate name after help
Synopsis
● racadm help
● racadm help <subcommand>
Input None
Example
racadm help
racadm help deploy
NOTE:
● The help command displays a complete list of subcommands.
● The racadm help < subcommand > command displays information for the specified subcommand
only.
arp
Description
Displays the networking ARP table.
Synopsis
racadm arp
Input
racadm arp
Example
Table 4. racadm arp
Address HWtype HWaddress Flags Mask Iface
192.168.0.120 ether 00:00:5e:00:01:01 C pub
10 RACADM sub command details