CLI Guide

● Configuration of chassis to a static IPv6 address:
racadm setniccfg -m chassis -s -6 2001:DB8::2 64 2001:DB8::1
● Configuration of VLAN id for chassis:
racadm setniccfg -m chassis -v 1000
● Removal of VLAN configuration from a chassis:
racadm setniccfg -m chassis -v
swinventory
Description Displays the list of the software objects installed in the chassis.
Synopsis
racadm swinventory
Input
racadm swinventory
Example To view the software inventory:
racadm swinventory
traceroute
Description
Prints the route packets trace to the network host.
Synopsis
racadm traceroute <host>
Input <host>—The IPv4 address or hostname of the remote endpoint to trace.
Example To execute a trace route for IP address 192.168.0.2:
racadm traceroute 192.168.0.2
traceroute6
Description
Prints the route packets trace to the network host.
Synopsis
racadm traceroute6 <host>
Input <host>—The IPv6 address/hostname of the remote end point to trace.
Example To execute a trace route for address FE80:0000:0000:0000:0202:B3FF:FE1E:8329:
racadm traceroute6 FE80:0000:0000:0000:0202:B3FF:FE1E:8329
26 RACADM sub command details