CLI Guide

3. racadm config -g cfglannetworking -o cfgDNSServer1 100.69.112.5
For Alternate DNS Server name use cfgDNSServer2
4. racadm config -g cfglannetworking -o cfgDNSRegisterRac 1
If step 1 is applied, to return to the original state.
NOTE: You can modify the cfgDNSServer1 and cfgDNSServer2 only when cfgDNSServersFromDHCP is 0. Else, the static
DNS server settings are ignored.
NOTE: Disable Use DHCP for DNS Domain Name to configure the DNS Domain Name.
NOTE: Configure the DNS Name, DNS Domain Name, and DNS server address before enabling Register with DNS.
The following sections provide information about the objects in the cfgLanNetworking group.
cfgDNSServersFromDHCP (Read or Write)
Description
Specifies if the DNS server IPv4 addresses must be assigned from the DHCP server on the network.
This property is used only if DHCP is enabled.
Legal Values
● 1 — True
● 0 — False
Default 0
cfgDNSServer1 (Read or Write)
Description
Specifies the IPv4 address for DNS server 1. This property is only valid if cfgDNSServersFromDHCP is
set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical values while swapping
addresses.
Legal Values String representing a valid IPv4 address. For example: 192.168.0.20.
Default 0.0.0.0
cfgDNSServer2 (Read or Write)
Description
Retrieves the IPv4 address for DNS server 2. This parameter is only valid if cfgDNSServersFromDHCP
is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical values while swapping
addresses.
Legal Values String representing a valid IPv4 address. For example: 192.168.0.20.
Default 0.0.0.0
cfgDNSRegisterRac (Read or Write)
Description
Registers the iDRAC or management module name on the DNS server. When you set this parameter, the
management module registers its DNS name for its IPv4 and IPv6 addresses with the DNS server.
28 OpenManage Enterprise Modular property database group and object descriptions