Users Guide

Figure 8. NVMe Settings in BIOS

NOTE:

If you change the NVMe Mode setting from RAID to Non RAID, ensure that the NVMe driver (Microsoft or third-

party NVMe driver) is installed manually in the Windows environment.

Creating a virtual disk

For more information about creating a virtual disk, see Creating the virtual disks on page 23.

Checking PERC S140 options and the boot list priority.

1. In the Virtual Disks field, ensure the bootable virtual disk is the first virtual disk listed. If the bootable virtual disk is not the

first virtual disk listed, see Swapping two virtual disks on page 24.

NOTE:

If Non-RAID virtual disks are used (and appear in the Virtual Disks list), the Swap Two Virtual Disks option is

enabled only if the system contains a RAID Capable physical disk.

2. Select Continue to Boot and press Enter.

Installing the drivers