Users Guide

Table 4. Virtual disk specifications for PERC S140 with SATA configuration (continued)

Specification PERC S140

Maximum number of physical disks in a RAID 1 2

Maximum number of physical disks in a RAID 5 12

Maximum number of physical disks in a RAID 10 12

Minimum number of physical disks in a volume 1

Minimum number of physical disks in a RAID 0 2

Minimum number of physical disks in a RAID 1 2

Minimum number of physical disks in a RAID 5 3

Minimum number of physical disks in a RAID 10 4

NOTE: The configurations listed in the table above may vary with the hard-drive backplane of your system.

Table 5. Virtual disk specifications for PERC S140 with NVMe configuration

Specification PERC S140

Maximum number of physical disks supported 30

Maximum number of virtual disks supported 30

NOTE: Maximum number of virtual disks may exceed 30 when:

● physical disks are migrated from any other configuration

● a disk in Ready state is converted to a non-RAID disk

Maximum number of virtual disks supported from a single

disk group

NOTE: Maximum number of virtual disks can exceed more than 16 from a single disk group as there is no constraint from

PERC S140.

Minimum virtual disk size 102 MB

Maximum number of physical disks per virtual disk 16

Maximum number of virtual disks per physical disk 30

Maximum number of physical disks in a volume 1

Maximum number of physical disks in a RAID 0 16

Maximum number of physical disks in a RAID 1 2

Maximum number of physical disks in a RAID 5 16

Maximum number of physical disks in a RAID 10 16

Minimum number of physical disks in a volume 1

Minimum number of physical disks in a RAID 0 2

Minimum number of physical disks in a RAID 1 2

Minimum number of physical disks in a RAID 5 3

Minimum number of physical disks in a RAID 10 4

Supported operating systems

The S140 controller supports the following operating systems:

Overview