Users Guide

Table 14. Management module Interfaces (continued)

Interface Description

1. Download the OME-Modular MIB file from the https://www.dell.com/support.

2. Use MIB walker tool to get supported information using OIDs.

NOTE: SNMP SET is not supported.

Serial You can use the serial interface to access OME–Modular by connecting the micro USB

port on the rear of the management module to a laptop and opening a terminal

emulator. The user interface that is displayed enables you to log in to the management

module, networking IOMs, or servers (iDRAC). You can have a maximum of one serial

session open at a time.

Quick Sync You can have a maximum of one Quick Sync session open at a time.

KVM You can have a maximum of one KVM session open at a time.

Chassis Direct The Chassis Direct feature enables you to access management consoles such as iDRAC

and management module of devices on the MX7000 chassis.

Viewing chassis hardware

On the OME–Modular home page, click Hardware to view details of the hardware components that are installed in the chassis.

You can also view the chassis hardware details by clicking Devices > Chassis > View Details > Hardware. The hardware

components comprise of chassis power supplies, chassis slots, management module, fans, temperature, FRU, device

management information, installed software, and management ports.

NOTE:

If the Power Supply Unit (PSU) is absent, the health state and power status for the PSU are not displayed on the

Chassis > Hardware > Chassis Power Supplies page.

NOTE: Maintain a minimum interval of two minutes while removing and inserting any device.

Chassis slot details

The Chassis Slots page displays details of the slots that are inserted in the chassis. The details are—number, type, and name

of the slot, name of the device, model, unique identification code of the slot, and, the number of VLAN IDs associated with the

slot. The page also indicates if a server profile is associated with the slot.

You can perform the following tasks on the Chassis Slots page:

● Edit Profile—Displays the Edit Profile window where you can modify the attributes and boot options of the slot.

● Attach Profile—Displays the Select a template window where you can select a template and attach it to the slot.

● Detach Profile—Displays the Detach Profile window where you can remove the profile that is associated with a slot.

● System Reseat—Virtually reseats the compute or storage sleds, and IOMs. This operation causes the devices to behave as if

they were physically removed and reinserted.

● iDRAC Reset—Performs hard reset of the slot-based iDRAC interface. You can use this option to troubleshoot an

unresponsive iDRAC.

Viewing chassis alerts

On the OME–Modular home page, click Alerts to view details of the alerts triggered for the events that occurred in the chassis.

You can also view the chassis hardware details by clicking Devices > Chassis > View Details > Alerts.

You can sort the list of alerts based on the following advanced filters:

● Severity

● Acknowledge

● Start Date

● End Date

● Source Name

Logging in to OME-Modular