Users Guide

Editing VLANs
You can add or remove VLANs on the deployed servers in a SmartFabric.
To add or remove VLANs:
1. From the menu, click Devices > Fabric.
2. Select the fabric for which you want to add or remove the VLAN.
3. In the left pane, select Servers and select the required servers.
4. Click Edit Networks.
5. Select one of the following options:
● NIC teaming from LACP
● No Teaming
● Other
6. Define the tagged and untagged VLANs to modify the VLAN selections as required.
7. Select VLANs on Tagged and Untagged Network for each Mezzanine card port.
8. Click Save.
VLAN scaling guidelines
The number of recommended VLANs differs between the modes as SmartFabric mode provides network automation capabilities
that Full Switch mode does not.
The following table lists the maximum number of VLANs recommended per fabric, Uplink, and server port:
Table 21. Maximum number of VLANs recommended in SmartFabric mode
OS10 Version Parameter Value
10.5.0 Maximum VLANs per fabric 256
Maximum VLANs per uplink 256
Maximum VLANs per server port 64
10.4.0.R3S
10.4.0.R4S
Maximum VLANs per fabric 128
Maximum VLANs per uplink 128
Maximum VLANs per server port 32
SmartFabric Services 87